-
HÖRSTAD Cement Coated Overlay Board for 16mm Pipe (200mm Spacing) 1200mm x 600m x 20mm
Routed overlay panels are manufactured from high density XPS which is thermally insulating, lightweight and waterproof. Faced with a reinforced cement coating.
-
HÖRSTAD Chipboard Panel
Moisture resistant, routed chipboard available standard or foiled. Highly conductive which allows for an even spread of heat throughout the floor. system should be completed with an overlay board or suitable plywood. The board size is 2400mm x 600mm x 22mm, being grooved on one face as required to suit 12mm or 16mm underfloor heating pipe with radius returns as standard. Typically installed directly onto floor joists (usually insulated in between), utilizing standard chipboard screws and joint adhesive. An overlay board or suitable plywood should be applied prior to the application of any floor finishes. Suitable for new build or retrofit installations. Installed directly onto flow joists allow for a lower floor build up. For extra thermal performance we offer a foil faced option.
-
HÖRSTAD Chipboard Panel Foil Topped
HÖRSTAD Structural Foil Topped Chipboard Panel with return for 16mm pipe (150mm spacing) 1800mm x 605mm x 22mm. Moisture resistant, routed chipboard available standard or foiled. Highly conductive which allows for an even spread of heat throughout the floor. System should be completed with an overlay board or suitable plywood. The board size is 2400mm x 600mm x 22mm, being grooved on one face as required to suit 12mm underfloor heating pipe with radius returns as standard. Typically installed directly onto floor joists (usually insulated inbetween), utilising standard chipboard screws and joint adhesive. An overlay board or suitable plywood should be applied prior to the application of any floor finishes. Suitable for new build or retrofit installations. Installed directly onto floor joists allowing for a lower floor build up.
-
HÖRSTAD Clip for Mounting UFH Pipe to Reinforcing Mesh – Pack of 100
These pipe clips are the perfect way to mount your underfloor heating pipe to reinforcing mesh. They are made of high-quality plastic that is both durable and flexible, making them ideal for use in a variety of applications. The clips are designed to be easy to install, and they can be used with pipes of all sizes.
-
HÖRSTAD Clip Rail 1m Length (14-20mm) 100pcs
Clip rail track is ideal when using warm water based underfloor heating within a screed or concrete floors.
-
HÖRSTAD Decoupling Membrane Heating Cable 100m – 9.23m²
This heating cable is quick and easy to install, plus it’s the most reliable UFH cable. It combines a TwistedTwin cable, and in-line joint technology. This removes risk of damaging the cable during installation, as cutting into the membrane and substrate is no longer required.
- Compatible with all decoupling membrane mats.
- No bulky hot/cold joint that needs cutting into the floor.
- Install into HORSTAD membrane or self-adhesive membrane at either 130W/m² or 195W/m²
-
HÖRSTAD Decoupling Membrane Heating Cable 12m – 1.15m²
This heating cable is quick and easy to install, plus it’s the most reliable UFH cable. It combines a TwistedTwin cable, and in-line joint technology. This removes risk of damaging the cable during installation, as cutting into the membrane and substrate is no longer required.
- Compatible with all decoupling membrane mats.
- No bulky hot/cold joint that needs cutting into the floor.
- Install into HORSTAD membrane or self-adhesive membrane at either 130W/m² or 195W/m²
-
HÖRSTAD Decoupling Membrane Heating Cable 150m – 13.85m²
This heating cable is quick and easy to install, plus it’s the most reliable UFH cable. It combines a TwistedTwin cable, and in-line joint technology. This removes risk of damaging the cable during installation, as cutting into the membrane and substrate is no longer required.
- Compatible with all decoupling membrane mats.
- No bulky hot/cold joint that needs cutting into the floor.
- Install into HORSTAD membrane or self-adhesive membrane at either 130W/m² or 195W/m²
-
HÖRSTAD Decoupling Membrane Heating Cable 18m – 1.73m²
This heating cable is quick and easy to install, plus it’s the most reliable UFH cable. It combines a TwistedTwin cable, and in-line joint technology. This removes risk of damaging the cable during installation, as cutting into the membrane and substrate is no longer required.
- Compatible with all decoupling membrane mats.
- No bulky hot/cold joint that needs cutting into the floor.
- Install into HORSTAD membrane or self-adhesive membrane at either 130W/m² or 195W/m²
-
HÖRSTAD Decoupling Membrane Heating Cable 200m – 18.46m²
This heating cable is quick and easy to install, plus it’s the most reliable UFH cable. It combines a TwistedTwin cable, and in-line joint technology. This removes risk of damaging the cable during installation, as cutting into the membrane and substrate is no longer required.
- Compatible with all decoupling membrane mats.
- No bulky hot/cold joint that needs cutting into the floor.
- Install into HORSTAD membrane or self-adhesive membrane at either 130W/m² or 195W/m²
-
HÖRSTAD Decoupling Membrane Heating Cable 21m – 2.31m²
This heating cable is quick and easy to install, plus it’s the most reliable UFH cable. It combines a TwistedTwin cable, and in-line joint technology. This removes risk of damaging the cable during installation, as cutting into the membrane and substrate is no longer required.
- Compatible with all decoupling membrane mats.
- No bulky hot/cold joint that needs cutting into the floor.
- Install into HORSTAD membrane or self-adhesive membrane at either 130W/m² or 195W/m²
-
HÖRSTAD Decoupling Membrane Heating Cable 31m – 2.88m²
This heating cable is quick and easy to install, plus it’s the most reliable UFH cable. It combines a TwistedTwin cable, and in-line joint technology. This removes risk of damaging the cable during installation, as cutting into the membrane and substrate is no longer required.
- Compatible with all decoupling membrane mats.
- No bulky hot/cold joint that needs cutting into the floor.
- Install into HORSTAD membrane or self-adhesive membrane at either 130W/m² or 195W/m²
-
HÖRSTAD Decoupling Membrane Heating Cable 37m – 3.46m²
This heating cable is quick and easy to install, plus it’s the most reliable UFH cable. It combines a TwistedTwin cable, and in-line joint technology. This removes risk of damaging the cable during installation, as cutting into the membrane and substrate is no longer required.
- Compatible with all decoupling membrane mats.
- No bulky hot/cold joint that needs cutting into the floor.
- Install into HORSTAD membrane or self-adhesive membrane at either 130W/m² or 195W/m²
-
HÖRSTAD Decoupling Membrane Heating Cable 42m – 4.0m²
This heating cable is quick and easy to install, plus it’s the most reliable UFH cable. It combines a TwistedTwin cable, and in-line joint technology. This removes risk of damaging the cable during installation, as cutting into the membrane and substrate is no longer required.
- Compatible with all decoupling membrane mats.
- No bulky hot/cold joint that needs cutting into the floor.
- Install into HORSTAD membrane or self-adhesive membrane at either 130W/m² or 195W/m²
