-
HÖRSTAD Border Edge Insulation with overlap 25m (8mm x 150mm)
Border edge insulation designed for use in underfloor heating systems, laid within a screed.
-
HÖRSTAD Border Edge Insulation with overlap 50m (8mm x 100mm)
Border edge insulation designed for use in underfloor heating systems, laid within a screed.
-
HÖRSTAD Cement Coated Overlay Board for 16mm Pipe (150mm Spacing) 1200mm x 600m x 20mm
Routed overlay panels are manufactured from high density XPS which is thermally insulating, lightweight and waterproof. Faced with a reinforced cement coating.
-
HÖRSTAD Cement Coated Overlay Board for 16mm Pipe (200mm Spacing) 1200mm x 600m x 20mm
Routed overlay panels are manufactured from high density XPS which is thermally insulating, lightweight and waterproof. Faced with a reinforced cement coating.
-
HÖRSTAD Chipboard Panel
Moisture resistant, routed chipboard available standard or foiled. Highly conductive which allows for an even spread of heat throughout the floor. system should be completed with an overlay board or suitable plywood. The board size is 2400mm x 600mm x 22mm, being grooved on one face as required to suit 12mm or 16mm underfloor heating pipe with radius returns as standard. Typically installed directly onto floor joists (usually insulated in between), utilizing standard chipboard screws and joint adhesive. An overlay board or suitable plywood should be applied prior to the application of any floor finishes. Suitable for new build or retrofit installations. Installed directly onto flow joists allow for a lower floor build up. For extra thermal performance we offer a foil faced option.
-
HÖRSTAD Clip Rail 1m Length (14-20mm) 100pcs
Clip rail track is ideal when using warm water based underfloor heating within a screed or concrete floors.
-
HÖRSTAD Decoupling Membrane Heating Cable 100m – 9.23m²
This heating cable is quick and easy to install, plus it’s the most reliable UFH cable. It combines a TwistedTwin cable, and in-line joint technology. This removes risk of damaging the cable during installation, as cutting into the membrane and substrate is no longer required.
- Compatible with all decoupling membrane mats.
- No bulky hot/cold joint that needs cutting into the floor.
- Install into HORSTAD membrane or self-adhesive membrane at either 130W/m² or 195W/m²
-
HÖRSTAD Decoupling Membrane Heating Cable 12m – 1.15m²
This heating cable is quick and easy to install, plus it’s the most reliable UFH cable. It combines a TwistedTwin cable, and in-line joint technology. This removes risk of damaging the cable during installation, as cutting into the membrane and substrate is no longer required.
- Compatible with all decoupling membrane mats.
- No bulky hot/cold joint that needs cutting into the floor.
- Install into HORSTAD membrane or self-adhesive membrane at either 130W/m² or 195W/m²
-
HÖRSTAD Decoupling Membrane Heating Cable 150m – 13.85m²
This heating cable is quick and easy to install, plus it’s the most reliable UFH cable. It combines a TwistedTwin cable, and in-line joint technology. This removes risk of damaging the cable during installation, as cutting into the membrane and substrate is no longer required.
- Compatible with all decoupling membrane mats.
- No bulky hot/cold joint that needs cutting into the floor.
- Install into HORSTAD membrane or self-adhesive membrane at either 130W/m² or 195W/m²
-
HÖRSTAD Decoupling Membrane Heating Cable 18m – 1.73m²
This heating cable is quick and easy to install, plus it’s the most reliable UFH cable. It combines a TwistedTwin cable, and in-line joint technology. This removes risk of damaging the cable during installation, as cutting into the membrane and substrate is no longer required.
- Compatible with all decoupling membrane mats.
- No bulky hot/cold joint that needs cutting into the floor.
- Install into HORSTAD membrane or self-adhesive membrane at either 130W/m² or 195W/m²
-
HÖRSTAD Decoupling Membrane Heating Cable 200m – 18.46m²
This heating cable is quick and easy to install, plus it’s the most reliable UFH cable. It combines a TwistedTwin cable, and in-line joint technology. This removes risk of damaging the cable during installation, as cutting into the membrane and substrate is no longer required.
- Compatible with all decoupling membrane mats.
- No bulky hot/cold joint that needs cutting into the floor.
- Install into HORSTAD membrane or self-adhesive membrane at either 130W/m² or 195W/m²
