-
HÖRSTAD EPS Overlay Panel with Foil 1200 x 600 x 30mm (150mm spacing) for 16mm pipe
Grooved, foiled insulation panels for underfloor heating pipe.
-
HÖRSTAD EPS Overlay Panel with Foil 1200 x 600 x 30mm (150mm spacing) for 16mm pipe
Grooved, foiled insulation panels for underfloor heating pipe.
-
HÖRSTAD Black Tacker Clips 50mm (300pcs)
High quality Tacker Clips 40mm Black with insertion depth of 22mm. Ideal for use with UFH pipes of 14mm, 16mm, 17mm, 18mm & 20mm. Material is Polypropylene. Pack quantity is 300pcs per box.
-
HÖRSTAD Pipe Bends 90° for 16mm Pipe (25pcs/box)
Allows installers to bend heating pipes in a 90 degree bow without forming kinks which impede flow within the pipe.
-
HÖRSTAD Tape Wide 72mm x 66m
Wide 72mm x 6mm tape for securing vapour barrier and border edge on site.
-
HÖRSTAD Border Edge Insulation 50m (8mm x 100mm)
Border edge insulation is designed for use in underfloor heating systems, laid within a screed. The border edge insulation is run around the perimeter wall of each room to be heated, held in place with a temporary fixing prior to screeding. The standard border edge insulation comes in 50m rolls and for a typical installation we recommend allowing 1 linear metre of edge insulation per square metre of heated floor.
-
eUFH Self Adhesive Mesh 150W/m² 1.0m²
150W/m² Mesh electric underfloor heating works perfectly as a primary heat source in most property types.
- Fully self adhesive mesh sticks wire side down to protect the heating cable during installation.
- Unique, stress-free TwistedTwin heating cable with full earth protection
- IP68 impervious to moisture and safe in bathrooms, showers and wet rooms
- 3.5mm thick mat with low profile LayFlat cold tail.
- Can also be used under tiled walls.
-
eUFH Self Adhesive Mesh 150W/m² 5.0m²
150W/m² Mesh electric underfloor heating works perfectly as a primary heat source in most property types.
- Fully self adhesive mesh sticks wire side down to protect the heating cable during installation.
- Unique, stress-free TwistedTwin heating cable with full earth protection
- IP68 impervious to moisture and safe in bathrooms, showers and wet rooms
- 3.5mm thick mat with low profile LayFlat cold tail.
- Can also be used under tiled walls.
-
eUFH Self Adhesive Mesh 150W/m² 8.0m²
150W/m² Mesh electric underfloor heating works perfectly as a primary heat source in most property types.
- Fully self adhesive mesh sticks wire side down to protect the heating cable during installation.
- Unique, stress-free TwistedTwin heating cable with full earth protection
- IP68 impervious to moisture and safe in bathrooms, showers and wet rooms
- 3.5mm thick mat with low profile LayFlat cold tail.
- Can also be used under tiled walls.
-
HÖRSTAD Decoupling Membrane Heating Cable 100m – 9.23m²
This heating cable is quick and easy to install, plus it’s the most reliable UFH cable. It combines a TwistedTwin cable, and in-line joint technology. This removes risk of damaging the cable during installation, as cutting into the membrane and substrate is no longer required.
- Compatible with all decoupling membrane mats.
- No bulky hot/cold joint that needs cutting into the floor.
- Install into HORSTAD membrane or self-adhesive membrane at either 130W/m² or 195W/m²
-
HÖRSTAD Decoupling Membrane Heating Cable 12m – 1.15m²
This heating cable is quick and easy to install, plus it’s the most reliable UFH cable. It combines a TwistedTwin cable, and in-line joint technology. This removes risk of damaging the cable during installation, as cutting into the membrane and substrate is no longer required.
- Compatible with all decoupling membrane mats.
- No bulky hot/cold joint that needs cutting into the floor.
- Install into HORSTAD membrane or self-adhesive membrane at either 130W/m² or 195W/m²
-
HÖRSTAD Decoupling Membrane Heating Cable 150m – 13.85m²
This heating cable is quick and easy to install, plus it’s the most reliable UFH cable. It combines a TwistedTwin cable, and in-line joint technology. This removes risk of damaging the cable during installation, as cutting into the membrane and substrate is no longer required.
- Compatible with all decoupling membrane mats.
- No bulky hot/cold joint that needs cutting into the floor.
- Install into HORSTAD membrane or self-adhesive membrane at either 130W/m² or 195W/m²
