OUR PRODUCTS
expertly developed to ensure low running costs AND ease of installation
HÖRSTAD Accessories
Accessories Products
-
HÖRSTAD Border Edge Insulation 50m (8mm x 100mm)
Border edge insulation is designed for use in underfloor heating systems, laid within a screed. The border edge insulation is run around the perimeter wall of each room to be heated, held in place with a temporary fixing prior to screeding. The standard border edge insulation comes in 50m rolls and for a typical installation we recommend allowing 1 linear metre of edge insulation per square metre of heated floor.
-
HÖRSTAD Tape Wide 72mm x 66m
Wide 72mm x 6mm tape for securing vapour barrier and border edge on site.
-
HÖRSTAD Pipe Bends 90° for 16mm Pipe (25pcs/box)
Allows installers to bend heating pipes in a 90 degree bow without forming kinks which impede flow within the pipe.
-
HÖRSTAD Border Edge Insulation with overlap 50m (8mm x 100mm)
Border edge insulation designed for use in underfloor heating systems, laid within a screed.
-
HÖRSTAD Vapour Barrier 125mu 50m (200 sqm)
Vapour barrier protects the layers of the floor structure from moisture contained in the concrete screed during its hydration and seasoning.
-
HÖRSTAD UFH Pipe Conduit Sleeving Red 50M Roll
Pipe conduit is a flexible, corrugated tube that is used to protect underfloor heating pipes.
-
HÖRSTAD Pipe Bends 90° for 12mm Pipe (25pcs/box)
High Quality Plastic bend guiding product for pipes 16-18mm
-
HÖRSTAD Mixing Pump Set (Wilo) for Manifold
Circulation systems such as underfloor heating systems can only function seamlessly if no air is present in the system. They prevent premature pump failure, improve heat distribution, increase efficiency and make for a low-noise system. That is why our pump has built in a venting routine mode. In this mode, the pump runs on and off for 10 minutes in order to force the air to the highest point in the system. An installer will then vent the system, check whether the system pressure is still correct and apply more if necessary.
-
HÖRSTAD Border Edge Insulation with overlap 25m (8mm x 150mm)
Border edge insulation designed for use in underfloor heating systems, laid within a screed.
-
HÖRSTAD Border Edge Insulation 50m (8mm x 150mm)
Border edge insulation designed for use in underfloor heating systems, laid within a screed.
-
HÖRSTAD Actuator Valve 230V
Horstad Actuator 230V for opening & closing thermostatice valves on Underfloor Heating Manifolds.
